Mobile Batch Plant

Specification

50 tonne 3 tonne 9,600 litre 2 x 0.75kw 1 x 2.2kw 1 x 3kw 1 x 7.5kw 1 x 90kva Weigh Hopper Capacity Batching Capacity

Silo Cement Weight Hopper Water Tank Admixture Pumps 50mm Water Pump 20mm Pressure Pump Rotary Screw Air Compressor 6 cylinder Cummins Generator 8 cubic metres Length     20 metres Width       3.5 metres Height      5 metres plus Hand                   Rails and Filter 40 cubic metres per hour

         

Approximate area to position batch plant and stock piles of sand and aggregate would be a minimum of 3,000 sq metres.
The mobile batch plant is permanently mounted on a tri-axle suspension semi trailer chassis and is road registered to travel on NSW roads under permit. The plant is constructed to the NSW Mines Specifications so as to be able to operate in mines and quarries throughout Australia.

SECOND SILO OPTION
Specification

60 tonne 1 x 10kw  1 x 7.5kw 4 x

Silo Discharge Auger Discharge Auger Electric Load Cells with remote indicator Length  16 metres Width    3.5 metres Height   4.6 metres plus Hand Rails and Filter

         
If required a second 60 tonne portable silo can be used for cement or fly ash storage.

The silo sits on load cells and is able to direct discharge into the agitator via the mobile plant feed hopper or into the cement weight hopper.  The silo’s discharge augers plug directly into the electricity supply on the mobile plant.

The silo is permanently mounted on a tri-axle suspension semi trailer chassis and is road registered to travel on NSW roads under permit. The silo is constructed to the NSW Mines Specifications so as to be able to operate in mines and quarries throughout Australia.